100A Isolator Consumer Unit with RCD and SPD, 16 Module, 9 Way, Steel, Design Evo Range

• 100A RCCBs allow the board to be installed with upstream overload protection offered by any rating of cut out fuse (60A, 80A and 100A) without the need to calculate the sum of the downstream devices to establish overload requirements
• Type A RCCBs for general purpose circuits and circuits containing equipment incorporating electronic components
• Cable clamp – Secures supply cables on entry to main incoming device preventing any movement being transmitted through meter tails to device
• High integrity layout allows RCBOs (7 ways) to be fitted separate to the RCCBs for reduction of nuisance tripping on essential circuits and dividing earth leakage across multiple RCDs
• Round cable entry points top, bottom and sidesRigid top wall – Enhances rigidity to prevent distortion when removing knockouts
• Locate and hold cover – allows use of both hands whilst fitting cover
• Quick release clip on MCB/RCBO – Allows fitting and removal of device with busbar in place
• Optimised cabling space – Din rail positioned to provide maximum space at top of board
• Top mounted terminal rail makes the wiring of the neutral and earth connections neat and simpleTorque settings displayed inside front cover – easily accessible to electrician during installation and maintenance
• Factory fitted type 2 surge protection

Design Evo is the enhanced board for use in applications where the consumer unit is located in a living area of the dwelling.

The single row range of consumer units with a 116A rated current (InA) have been designed for installations where the upstream overcurrent protection device (OCPD) is rated at 100A or below, the 116A (InA) is where the consumer unit can be used with a 16A generation set when the bi-directional RCBO can be installed at the far end of the busbar.